Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Arlington Homeowners
If your garage door is binding, sagging, or just past the point where another repair makes sense, a new door is usually the smarter spend. We handle full garage door installation in Arlington with doors from Clopay, Amarr, Wayne Dalton, and Raynor, sized to your opening and matched to the way you actually use the door. Our technicians have up to 12 years of experience and work on LiftMaster, Chamberlain, and Genie openers every day, so the door and the operator get set up together instead of one fighting the other. Every job starts with a free measure and a written estimate, and the price is agreed before any work begins. Call (855) 340-9110 to get scheduled.
What Our Garage Door Installation Service Includes
Installation isn’t one job. A single-car door on a tight Arlington lot is a different project from a wide double door on a brick Colonial, and a wood door built to match the house is a different project again. Here’s how we break it down.
New Door Installation
New door installation means replacing the full door and hardware on an existing opening, keeping the framing you already have. You need it when the door has reached the end of its life, when panels are cracked or rusted through, or when the door simply no longer fits the look of the house. We measure the opening, check the headroom and side clearance, confirm the spring and track will work with the new door weight, and set the operator to match.
Single Car Door
A single car door is the standard 8- or 9-foot-wide opening found on most Arlington garages, and it’s the most common replacement we quote. It’s the right call when one door of a pair has failed and you want the two to match again, or when an older single door is letting in weather. We handle the door, the springs rated for that door’s weight, and the opener calibration as one job.
Double Car Door
A double car door covers a 16-foot opening, and it’s heavier than most homeowners expect, which is why the spring and torsion setup matters so much on these. You need one when you’re replacing a tired wide door or converting a two-single-door garage into a single wide opening. We size the springs to the actual door weight rather than guessing, and we check that the tracks and brackets handle the span without flexing.
Custom Garage Door
Custom garage door work covers non-standard sizes, unusual architecture, and doors built to match a specific facade. You need it when a stock door won’t fit the opening, when the house has arched or angled detail, or when you want a sectional door that reads as carriage-house wood. We measure carefully, walk through the finish and window options with you, and coordinate the order so the door that arrives is the door that fits.
Steel Doors
Steel doors are the workhorse choice for Arlington homes: they hold up to weather, they’re available in insulated panels, and they cost less than wood. You need one when you want a low-maintenance door that still looks clean on a brick or siding facade, or when the old steel door has dents and rust at the bottom section. We install steel sectional doors from Clopay and Amarr and match the opener to the door’s weight.
Wood Doors
Wood doors give you the warmth and detail that steel can’t, and they suit the older neighborhoods around Arlington where the houses already have wood trim. You need one when the facade calls for real wood or a wood-look finish and you’re willing to keep up with the finish. We install wood and wood-look doors from Wayne Dalton and Raynor, and we make sure the extra weight is matched by the right spring and a properly rated operator.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work on LiftMaster and Chamberlain systems every day, and we know how each one behaves after a new door goes up. LiftMaster operators with belt or chain drives need the travel limits and force settings reset when the door weight changes, and Chamberlain units with MyQ connectivity need to be re-paired after a door swap so the app and remotes keep working. We also install Genie openers and handle the wall control and safety-reversing sensor alignment that a heavier or thicker door requires.
On the door side, we install Clopay, Amarr, Wayne Dalton, and Raynor products. Clopay and Amarr cover the insulated steel range well, Wayne Dalton is a good fit for wood-look and carriage styles, and Raynor handles the premium and custom end. Whether you have a Clopay door and a LiftMaster opener or any other make, we can help. If you’re not sure whether your existing operator will handle a heavier door, we can check it during the measure and tell you straight.
Signs You Need Garage Door Installation Right Now
- Repeated panel and roller repairs. If you’ve had the same door repaired more than once in a year, the parts are telling you the door itself is worn out. New installation usually costs less over time than a string of small repairs on a door that’s already failing.
- Sagging or cracked panels. A bent or split panel throws the door out of balance and puts strain on the springs and opener. Once the panel structure is compromised, replacement is the safer route than chasing the problem panel by panel.
- The door won’t stay level when it closes. A gap along one side means the door, track, or springs are no longer matched. That’s a sign the whole assembly has drifted out of spec, and a new door with properly rated springs resets it.
- Rust and rot along the bottom section. Arlington winters and wet springs work on the bottom panel first. Once water is getting into the panel or the bottom seal has rotted through, the door is taking on moisture and the damage moves upward.
- The opener strains to lift the door. If your opener shudders, surges, or needs a nudge, the door is too heavy for it. That’s often a door weight problem, not an opener problem, and a new door sized to a matched opener fixes both.
Our Garage Door Installation Process – Step by Step
- 1
Free measure and assessment. We measure the opening, check headroom, side room, and backroom for the track, and look at the existing springs and operator. That tells us what door will actually fit and whether your current opener can stay.
- 2
Written estimate before anything is ordered. You get a written price for the door, the springs, the hardware, and any opener work, with the options spelled out. Nothing gets ordered until you’ve seen the number and agreed to it.
- 3
Door order and scheduling. Once you approve, we order the door and lock in an installation date. Ordering a door is a measured, scheduled job, not a same-day repair, so we set a realistic date and keep you posted.
- 4
Removal and installation day. We take down the old door and hardware, check the framing and brackets, then set the new tracks, springs, and panels. The springs are tensioned to the door’s actual weight, which is where a lot of rushed installs go wrong.
- 5
Balance test, opener calibration, and walkthrough. We cycle the door, check the balance and the safety reverse, reset the opener’s travel and force limits, and re-pair remotes and any connected app. Then we walk you through the operation and leave the written estimate as your record.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Arlington?
New garage door installation in Arlington typically runs $700 – $2,200 depending on the door size, material, insulation, and whether the opener needs replacing too. A standard single steel door sits toward the lower end of that range. A double door, an insulated door, or a wood or custom door moves toward the top. A matched pair of doors is essentially two installations, so plan for the range to roughly double.
What moves the price: the door size (single vs. double), the material (steel vs. wood), insulation and window options, whether the tracks and springs are reused or replaced, and whether your existing opener can handle the new door’s weight. If the opener needs replacing, add the opener installation range of $250 – $550.
| Work | Typical estimated range |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation (if needed) | $250 – $550 |
| Panel replacement (single panel) | $250 – $500 |
| Spring repair (one spring) | $180 – $340 |
How to avoid overpaying: get the door, springs, hardware, and opener labor quoted as separate lines, and ask whether the old door is being hauled away. A free estimate should include the measure, the door options, and a written price. The written estimate sets the final price, so the number you agree to is the number you pay. Call (855) 340-9110 for a free measure.
Garage Door Installation Near Arlington – Our Service Area
We handle garage door installation across Arlington and the surrounding neighborhoods, including University Center, Moorefield, Seven Corners, Bailey’s Crossroads, Lake Barcroft, Falls Church, West Falls Church, Alexandria, and Lincolnia. Installation is a scheduled job, so we book a measure and a date rather than promising same-day. For nearby areas like garage door installation and garage door installation, we schedule the same way. If you’re comparing options, our garage door installation page lays out the full range.
Serving Arlington, VA – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Arlington
Garage door installation is the removal of your old door, tracks, springs, and hardware and the fitting of a new door sized to your opening, with springs matched to the new door’s weight and the opener recalibrated. It’s different from repair, which fixes one failing part on the door you already have. Installation is a measured, ordered, and scheduled job. If your door is repairable, we’ll tell you that instead of pushing a new door.
A standard single or double door installation is usually a one-day job once the door is on site. Custom doors, wood doors, and jobs that include opener replacement can take longer. The bigger variable is the order lead time, which depends on the door you choose. We give you a realistic date at the estimate and keep you posted if the door’s arrival shifts.
New door installation in Arlington typically runs $700 – $2,200, and opener installation adds $250 – $550 if your current opener can’t handle the new door. The door size, material, insulation, and window options drive where you land in that range. The written estimate sets the final price, and the measure is free. Call (855) 340-9110 for an exact quote.
Yes. We install Clopay doors and work on LiftMaster and Chamberlain openers every day, and we also handle Amarr, Wayne Dalton, Raynor, and Genie. We know where each brand wears and how to set the opener to a new door’s weight. Whether your door is Clopay or another make, we can help.
No. Installation is a measured, ordered, and scheduled job, so it isn’t a same-day service. If your door has failed and can’t wait, our garage door repair team can assess it, and we answer the phone 24/7 at (855) 340-9110. Fast dispatch from 7am to 7pm, Sunday through Friday.
Warranty coverage depends on the door brand and model, and the manufacturer’s warranty terms come with the door you choose. Our workmanship on the installation is covered as part of the written estimate. We walk through the specific coverage with you before you approve the order, so there are no surprises later.
Clear the garage floor and the area in front of the door, and move anything hanging near the tracks or ceiling. Make sure we can reach the opener and a power outlet. If you have vehicles parked in the driveway, move them before the crew arrives. That’s usually all it takes for a smooth installation day.
Schedule Your Garage Door Installation Service in Arlington Today
Whether you need a new door or a custom build, we’ll measure, quote, and install it with a written price agreed before work starts. Call (855) 340-9110 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. See our main Garage Door Repair Arlington Pros page for the full range of services.
Written by the team at Garage Door Repair Arlington Pros.