Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Arlington?
Garage door installation in Arlington typically costs $700 – $2,200 for a new door, including professional installation. Standard single-car doors in the region generally land in the $700 – $1,300 range, while insulated double-car doors with premium hardware usually run $1,300 – $2,200. The written estimate sets the final price, and at Garage Door Repair Arlington Pros, every garage door installation quote is free.
Your garage door is your home’s largest moving part and its most-used entry point. When it stops working reliably, you don’t want a generalist guessing at it. You want a specialist who installs Clopay, Amarr, Wayne Dalton, and Raynor doors, and who can tell you in one call whether a new door costs less to run than a repair. We’re garage door specialists, not handymen, and every estimate starts with a straight answer about what you’ll actually spend in Arlington.
Key Takeaways
- New garage door installation in Arlington typically runs $700 – $2,200, depending on door size, material, and insulation.
- Opener installation adds $250 – $550 to the project.
- Door replacement costs are separate from repairs: spring repair runs $180 – $340 per spring, and a matched pair is usually done together at about double.
- The written estimate sets the final price, and estimates are free with fast dispatch from 7am to 7pm, Sunday through Friday.
- We install four of the biggest residential door brands and bring up to 12 years of technician experience to every job.
Call (855) 340-9110 for your free estimate. We answer 24/7.
Garage Door Installation Cost Breakdown (2026)
The line items below reflect typical estimated ranges for the Arlington market in 2026. Every job is priced individually, and the written estimate is the number that counts.
| Line Item | Typical Estimated Range |
|---|---|
| New door installation (single-car, standard) | $700 – $1,300 |
| New door installation (double-car, insulated) | $1,300 – $2,200 |
| New garage door installation, overall job range | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement (a single dented or damaged section) | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| General garage door repair | $150 – $600 |
Two things move the number up or down more than anything else: the door itself and whether your existing opener and hardware carry over. A straight door swap onto sound tracks and a working opener is the low end. A full tear-out that adds a new opener, new tracks, and upgraded insulation is the high end.
What Drives the Installation Price Up or Down
- Door size and bays. A single-car door is cheaper than a double-car door. More square footage of door means more material, more weight, and stronger springs.
- Material. Steel is the most common and the most economical. Wood and composite doors sit higher, and premium product lines add to the total, which is why Clopay, Amarr, Wayne Dalton, and Raynor span the range from entry-level to high-end.
- Insulation. An insulated door costs more up front but helps with a garage that sits under living space, common in Arlington’s close-in neighborhoods where the garage shares a wall or floor with the house.
- Opener. If your old opener isn’t rated for the new door’s weight, a new opener adds $250 – $550.
- Track and hardware condition. Reusing good tracks keeps the price down. Rotted or bent tracks need replacing.
- Site conditions. Tight rear-alley access, a low-clearance ceiling, or an uneven floor at the opening all take extra time on installation day.
What Affects Garage Door Installation Pricing in Arlington
Arlington’s housing stock shapes installation pricing in ways that generic price guides miss. Most of the city’s detached homes and townhouses sit on tight lots, and a large share of garages open onto a rear alley rather than a driveway. That changes how a crew handles the old door and how the new one comes in.
- Rear-alley garage access. Ballston, Virginia Square, and Lyon Village have many homes where the garage opens onto a narrow alley. Getting a full door panel to the opening, with a vehicle staged nearby, takes planning and a little more time than a wide suburban driveway.
- Low-clearance garages and townhome layouts. A lot of Arlington townhomes have garages under living space with a low ceiling. That means low-headroom track and a low-profile opener, which changes the hardware selection and the price.
- Attached garages under bedrooms. In neighborhoods like Ashton Heights and Clarendon, garages often sit directly below a bedroom or living area. An insulated door and a quiet belt-drive opener are worth the extra cost here; they change how the room above sounds.
- Older homes with non-standard openings. Pre-war homes in Cherrydale and Maywood sometimes have an opening that’s slightly off-square. We measure and confirm the rough opening before ordering, which avoids a return visit.
- HOA and historic-district rules. Some Arlington neighborhoods and historic districts limit door style and color. Check with your HOA or the county before you commit to a style. If a permit is required for your project, your city’s building department can confirm.
- Door weight and spring sizing. A heavier insulated or wood door requires a stronger torsion system. Springs are matched to the door weight, so a heavier door means slightly more in the spring and hardware line.
We know these patterns because we install doors across Arlington every week. When we arrive for a free estimate, we measure the rough opening, check the ceiling clearance, and look at how the old door comes out before we quote a single dollar.
Townhome and Attached-Garage Installations in Arlington
Townhome installations make up a large share of the work in Arlington, and they’re not the same as a standard detached-garage job. Here’s what changes when your garage shares walls with living space.
- Quiet hardware matters. A steel roller on a metal track is fine in a detached garage. Under a bedroom, we recommend nylon rollers and a belt-drive opener so the room above stays quiet.
- Low-profile openers. Townhome garages often have limited overhead space. A low-clearance opener solves it without rebuilding the ceiling.
- Tighter tolerances. The opening has to be measured precisely because townhome walls can’t flex. We bring the door and hardware that fit the numbers we measured, not a one-size approximation.
- Fire separation. If your garage shares a wall with your house, that wall is a fire-rated assembly. We install the door in a way that respects the separation; the door itself should close flush and seal correctly. Ask your building department about any fire-separation requirements specific to your unit.
How to Save on Garage Door Installation
The installation itself is a fixed cost once you commit, but there are real ways to bring the total down without cutting corners on safety.
- Reuse an opener that’s already healthy. If your existing LiftMaster, Chamberlain, or Genie opener is rated for the new door’s weight and the door is properly balanced, you can avoid the $250 – $550 opener line. We test it first and tell you honestly whether it has life left.
- Choose steel if you don’t need insulation. Steel doors sit at the entry-level end of the Clopay, Amarr, Wayne Dalton, and Raynor lines. If your garage doesn’t sit under living space, insulation is a nice option, not a must.
- Replace a single damaged panel instead of a whole door. If only the bottom panel is dented and the rest of the door is sound, panel replacement at $250 – $500 beats a full install.
- Get the free estimate before you commit. A written estimate tells you exactly where the money goes. Estimates are free; call (855) 340-9110.
- Ask about door balance during the estimate. A balanced door with a healthy spring system is less likely to need extra hardware on install day.
We don’t do discount pricing, but we do give a written estimate you can compare line by line against anything else you’re quoted. If a competitor’s number looks low, ask what’s excluded; it’s usually the springs, the opener, or the haul-away.
How Long Does a New Garage Door Installation Take in Arlington?
A standard single-car or double-car door installation takes about three to four hours on site when the tracks and opener carry over. A full project with a new opener, new tracks, and hardware takes most of a working day.
The bigger variable is measurement and ordering. We measure the rough opening on the estimate visit, then order the door in your chosen style and brand. Your install date is set once the door arrives. For townhomes and pre-war homes in Cherrydale and Maywood, we double-check the opening before ordering so the door arrives ready to hang.
If your current door is broken and you need help before the new one arrives, we offer same-day repair. Spring repair and cable work run $180 – $340 and $130 – $250 respectively (one spring, one cable), so you’re not stuck waiting on a new door. Call (855) 340-9110 to talk through your options.
Repair or Replace? A Quick Decision Guide for Arlington Homeowners
It’s usually cheaper to replace than to repair when three or more panels are damaged, when the tracks are bent beyond easy realignment, or when the door is out of balance and the spring system is worn. Otherwise, a targeted repair is the more economical choice.
- One damaged panel, sound door: repair. Panel replacement runs $250 – $500.
- Broken spring or cable, sound door: repair. Springs are $180 – $340 per spring; cables $130 – $250.
- Sticking or noisy door: repair. Track realignment is $120 – $240 and roller replacement $110 – $220.
- Door won’t move, opener shot, and the door is old: replace. A new install at $700 – $2,200 gets you a door that doesn’t need service every year.
- Cosmetic upgrade: replace. If your goal is curb appeal and a modern look, replacement is the answer, and we can install a Clopay or Amarr door that fits your style and your budget.
We’ll tell you honestly at the estimate which way makes sense for your door. Call (855) 340-9110 to book a free estimate.
Why Homeowners in Arlington Choose Us for Installation
We’re not a big-box installer or a general handyman. We’re a specialist shop that installs four of the major residential door brands and diagnoses every other brand we work on. Here’s what comes with the install.
- Brand familiarity. We install Clopay, Amarr, Wayne Dalton, and Raynor, and we work on LiftMaster, Chamberlain, Genie, and Craftsman openers. When you need parts to fit, we know the fit.
- Spring work done in-house. Springs are a safety-critical part of every door. We don’t outsource them, so the door we install is balanced and safe on day one.
- Emergency service as a named offering. If your door fails before the new one arrives, we answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday.
- One call for the whole job. We handle repair, opener, spring, and installation under one roof. No referrals, no runaround.
- Up to 12 years of technician experience. Every install is done by experienced technicians who’ve seen every door type in Arlington’s housing stock.
- Free estimates and a written price. The estimate is free and the written quote is the final price.
If you’re looking for a full range of repair and install options, Garage Door Repair Arlington Pros covers the whole spectrum. Our Garage Door Repair Arlington Pros page lists every service we offer.
Safety First: Why Installation Is a Trained-Professional Job
Springs, cables, and the torsion assembly are under intense tension even when the door looks harmless. Adjusting a torsion spring without the right tools and training can cause serious injury. That’s why we do spring work in-house with trained technicians and never hand out DIY instructions for it.
On a new install, the same safety logic applies: a door installed with poorly seated tracks, under-tensioned springs, or a misaligned opener can fail in ways that affect the whole door and the people underneath it. If your current door is jammed, don’t force it. Call (855) 340-9110 and we’ll diagnose it over the phone before we come out.
FAQs – Garage Door Installation Cost
How much does a new garage door cost in Arlington?
A new garage door installation in Arlington typically costs $700 – $2,200, including labor and hardware. Single-car doors land nearer $700 – $1,300, and insulated double-car doors with premium hardware toward $1,300 – $2,200. For an exact quote based on your opening and style, call (855) 340-9110. Estimates are free. We answer 24/7.
Is it cheaper to repair or replace a garage door?
It’s cheaper to repair when only one panel is damaged, when the tracks can be realigned, or when a spring or cable is the problem; panel replacement runs $250 – $500, spring repair $180 – $340 per spring, and track realignment $120 – $240. Replacement at $700 – $2,200 is usually the better long-term call when the door is old, multiple panels are damaged, or the tracks are bent beyond repair. Call (855) 340-9110 and we’ll give you a straight answer at the free estimate.
How much does a new garage door opener cost installed in Arlington?
A new opener installed in Arlington typically costs $250 – $550, including the opener and labor. That covers LiftMaster, Chamberlain, and Genie units. If your existing opener is healthy and rated for the new door’s weight, you can skip this line entirely. To talk it through, call (855) 340-9110; the estimate is free.
Can you install a garage door the same day in Arlington?
No: same-day scheduling applies to repair, not to a brand new door. Doors are ordered in your chosen style and brand after the estimate, then installed on a scheduled day. Until the new door arrives, same-day repair keeps your door functional. Spring repair at $180 – $340 and cable repair at $130 – $250 are available same day. Call (855) 340-9110. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do you install garage doors in the Arlington neighborhoods?
Yes. We install doors in Arlington and the surrounding neighborhoods, including Ballston, Clarendon, Lyon Village, Cherrydale, Ashton Heights, Virginia Square, and Maywood. For a single-car door at $700 – $1,300, a double-car at $1,300 – $2,200, or an opener at $250 – $550, call (855) 340-9110 and we’ll book your free estimate.
What brands do you install?
We install Clopay, Amarr, Wayne Dalton, and Raynor, spanning entry-level to premium residential doors. We work on LiftMaster, Chamberlain, Genie, and Craftsman openers. For a brand-and-style conversation with real pricing, call (855) 340-9110. Estimates are free.
Ready to Price Your Arlington Install?
Whether you’re replacing an old door in Ballston or planning a new install under a townhome in Clarendon, we’ll measure, quote, and explain every line. Call (855) 340-9110 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One call covers repair, opener, spring, or full replacement, and the written estimate sets the final price.
Pricing reflects the Arlington market as of 2026. Garage Door Repair Arlington Pros offers free estimates – call (855) 340-9110.
Written by the team at Garage Door Repair Arlington Pros.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Kevin Mercer"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Dev Shah"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Dale Doyle